S7-200

S7-200

S7-200

#
پارس کنترل
توزیع کننده مجاز تجهیزات فشار ضعیف و اتوماسیون زیمنس

S7-200

دوشنبه ۱۴ تیر ۱۳۹۵ | 15:040 نظر25354 بازدید


  • جزئیات محصول
  • معرفی محصول
  • نظرات کاربران

S7-221 CPU

  • 10 on board I/O - "non expandable"
  • 4kbytes program memory
  • 2kbytes max. program memory
  • 4 x 30kHz high speed counter
  • Real time clock option (stock no. 488-6381)

Siemens S7-221 CPU

S7-222 CPU

  • 14 on board I/O
  • 4kbytes programme memory
  • 2kbytes data memory
  • 4 x 30kHz high speed counter
  • Real time clock option, see stock no. 488-6381

Siemens S7-222 CPU

S7-224 CPU

  • 24 on board I/O
  • 12kbytes programme memory
  • 5kbytes data memory
  • 6 x 30kHz high speed counter
  • In-built real time clock
  • 4 x 20kHz pulse train outputs (dc powered model only)

Siemens S7-224 CPU

S7-224XP CPU

  • 24 on board I/O
  • Analogue I/O: 2 Inputs/1 output
  • 16kbytes programme memory
  • 10kbytes data memory
  • 2 x 200kHz high speed counter
  • 2 x RS-485 comms interface
  • In-built real time clock
  • 4 x 30kHz pulse train outputs
  • 100kHz pulse train output (dc powered model only)

Siemens S7-224XP CPU

S7-226 CPU

  • 40 on board I/O
  • 24kbytes of programme memory
  • 10kbytes of data memory
  • 6 x 30kHz high speed counter
  • 2 x RS-485 comms interfaces
  • In-built real time clock
  • 4 x 20kHz pulse train outputs (dc powered model only)

Siemens S7-226 CPU

Digital Input Module

  • Digital input modules with sixteen 24Vdc input channels

Digital Input Module

 

Digital Output Module

  • S7-200 Expansion Modules for 2nd & 3rd Generation
  • Digital output modules with eight transistor or SPCO relay outputs
  • Expansion modules cannot be used with S7-221

Digital Output Module

RTD Temperature Sensor Input Module

  • Expansion modules to increase the I/O capacity of the S7-200 CPUs
  • Input module to suit a wide variety of resistance temperature sensors, including all popular types of platinum film sensor
  • A maximum of 2 modules can be used with S7-222
  • Expansion modules cannot be used with S7-221

RTD Temperature Sensor Input Module

Thermocouple Sensor Input Module

  • Expansion modules to increase the I/O capacity of the S7-200 CPUs
  • Input module for use with most commercially available thermocouple temperature sensors or 0-80mV FS voltage inputs
  • A maximum of 2 modules can be used with S7-222
  • Expansion modules cannot be used with S7-221

Thermocouple Sensor Input Module

Analogue Output Module

  • Expansion modules to increase the I/O capacity of the S7-200 CPUs
  • Two channel analogue output module with 12-bit resolution ±10V output, or 11-bit resolution 4-20mA output
  • A maximum of 2 modules can be used with S7-222
  • Expansion modules cannot be used with S7-221

Analogue Output Module

     

CP243 AS-i Master

  • CP243-2 AS-i master module is an interface module which enables a S7-200 CPU to be connected to a AS-i netw
  • Can communicate with up to 31 nodes and each may have a maximum of 4 inputs and 4 outputs
  • Module is used where slave units in a AS-i network are required to be monitored or controlled and for diagnostics
  • This module is not compatible with S7-221 CPUs

CP243 AS-i Master

SIMATIC S7-200 Standard Module

  • Siemens S7-200 Base Units - 3rd Generation
  • Modular Expansion up to 256 total I/O (except S7-221)
  • Powerful Instruction Set, and Real Time performance
  • Expansion Modules for S7-200

SIMATIC S7-200 Standard Module

EM277 Profibus DP Slave

  • Used to interface between a S7-22X CPU and a Profibus DP network
  • Can be simultaneously operated as MPI and DP slave
  • MPI protocol enables simultaneous data exchange with MPI masters
  • Allows an S7-200 CPU to be connected to a Profibus DP or MPI network as a slave
  • In MPI mode, can be used to connect operator panels such as TD200 or TP177
  • Maximum number of nodes - 31

EM277 Profibus DP Slave

EM241 Modem Module

  • Modem Module expands the functionality of the S7-200 Micro PLC into remote communications
  • Directly connects to the S7-200's Expansion I/O bus
  • Baud Rates are self-negotiating dependent on Line Quality
  • Pulse or Tone Dialling, together with Call-back and Password Protection

EM241 Modem Module

EM253 Motion Module

  • Special function module that generates the pulse trains used for open loop control of the speed and position for either stepper motors or servo motors
  • Communicates with the S7-200 PLC over the expansion I/O bus
  • appears in the I/O configuration as an intelligent module with eight digital outputs

EM253 Motion Module

CP243-1 Ethernet Modules

  • TCP/IP
  • 8 communications channels for S7-comms (XPUT & XGET supported) and 1 for Micro/WIN
  • Choice of server or client configuration for each channel
  • OPC-client access with READ and WRITE (server)
  • Up to 32 data transfers per channel
  • Up to 212 bytes per data transfer
  • Configuration and diagnostics via industrial Ethernet
  • BOOTP option supported
  • Plug-and-play
  • Complete configuration supported in PLC

CP243-1 Ethernet Modules

STEP 7 Micro/WIN Software V4

  • Mouse-driven drop-down menus and toolbar
  • Data block editor
  • Password protection
  • Programme diagnostics and debug features
  • File converter Micro/DOS to Micro/WIN

STEP 7 Micro/WIN Software  V4

Micro/WIN Instruction Libraries and Toolbox Software/ PC Access

  • Stand-alone software package which is intended for use with the development of programs for the Siemens TP177 panel
  • Windows setting from the last session saved automatically
  • Improved printing features including both symbolic and absolute addresses
  • Verification of match between on and off line programme before running debug mode

Micro/WIN Instruction Libraries and Toolbox Software/ PC Access

Module Row Interconnection Cable

  • Enables modules to be linked together when positioned in more than one row
  • The 0.8m long cable can be used anywhere within the I/O chain

Module Row Interconnection Cable

Battery Module

  • This plug-in battery provides long term backup of stored data in S7-200 CPUs
  • Located in the memory sub-module memory slot

Battery Module

     

PPI Cables

  • RS-232 (serial) version connects directly to PC COM port and converts signal to PPI ("Point-to-Point-Interface") protocol
  • USB version is ideal for laptops and PC's that are not equipped with RS-232 (serial) ports

PPI Cables

SIEMENS S7-200 Brochure

SIEMENS S7-200 Manual

کد : S7-200
نام : S7-200
قیمت : 0 ریال
دیدگاه خود را بیان کنید